Intelligent control:

1. Automatic power on or power off selection

2. One key heat preservation

3. P.I.D. temperature customization

4. Synchronous linkage function of production line and equipment

5. Ready signal output

6. 7-day work timing control

7. Multi stage linear adjustment of motor and gear pump speed

8. Quick click interface

9. Custom heating sequence for each temperature zone

Attribute：

Melting cylinder: 10kg / 20lb

Throat: 4

Flux / hour: 16KG / HR

External dimension: l (885) x w (450) x H (1142)

Weight: 107Kg

Advantage:

The capacity of P10 hot melt glue machine is 10kg. It is equipped with a set of independent drive motor and a set of single or double-layer gear pump. For different glue melting speed and glue supply, the position of installing low level sensor is reserved in the melting cylinder, and the switch signal can also be output through the control system.

Host specification：

Number of motors: 1

Drive motor: 1 / 4 HP: 220vac-3phase

Maximum pump speed: 100 rpm

Gear pumpable ratio: 0.27 CC / revolution - 10.0cc/revolution (optional)

Gear pumpable output: single gear pump / double gear independent output (optional)

Maximum output: 4 sprayers / pipes

System glue pressure: maximum 1000PSI (68bar)

Control function:

Power supply voltage: 220VAC 1PH + N + e 50 / 60Hz

                                  220VAC 3PH+N+E 50/60Hz

                                  380VAC 3PH+N+E 50/60Hz

Maximum power of the system: 12KW

Temperature control mode: micro processing segmented p.i.d control

Electrical connection mode: hane-16a connector

System ready function can operate synchronously with production line: switch signal

Temperature sensor: Standard ni120rtd ± 2 / optional Pt100

Melting cylinder and motor protection: over temperature interruption and low temperature start protection

Automatic tracking function of production line: 0-10V

Motor detection rotation stop detection: switch signal

Temperature control fault detection: switch signal

Ready output: 220V voltage output