Welcome to the official website of cross sea industry and Trade Co., Ltd！
英文|中文
18138013868info@wahrheits.com
Name：P18 Adhesive Melter with High-Precision Control System
Introduce：It is suitable for high precision hot melt adhesive application. It adopts PLC controlled high precision control system and multi-functional temperature control module.
Features
Intelligent control：
1、Automatic startup or shutdown option.
2、One-click heat preservation.
3、P.I.D. temperature user-defined.
4、Production line and device synchronous linkage function.
5、The ready signal output.
6、7 days working timing control.
7、Rotation speed of motors and gear pumps are multistage linear adjustment.
8、Shortcut inching interface.
9、Each temperature zone allows user-defined heating order.
Device Properties：
| Melt tank: | 18Kg |
| Hose ： | 4 |
| Melt volume / hour | 30Kg/hr |
| Dimensions | L(1044) x W(520) x H(1222) |
| Weight ： | 130Kg |
Equipment advantages：
P18 melters capacity of 18kg, configure two independent drive motor and connect two sets of single or double gear pump for different speeds and for melt glue melting tank can (choose) auxiliary heating zone to enhance melt rate, melt tank reserved for low level sensors installed position also switch signal output by the control system.
| Host specification | |
| Motor Number： | 2 |
| Drive motor： | 1/4 HP 220VAC-3Phase |
| Maximum pump speed： | 100 rpm/min |
| Gear pump： | 0.55 CC / rpm -3.0CC / rpm(optional)? 0.27 CC / rpm-10.0CC / rpm (optional) |
| Gear can pump output： | Single gear pump / double-ring gear independent output (optional) |
| You can connect up output： | 4 nozzle / hose |
| System gluing press： | Maximum 1000PSI (68bar) |
| Control | |
| Supply voltage： | 220VAC 1PH+N+E 50/60Hz |
| 220VAC 3PH+N+E 50/60Hz | |
| 380VAC 3PH+N+E 50/60Hz | |
| Maximum Power： | 25KW |
| Temperature control： | Microprocessor controlled segmented P.I.D |
| Electrical connections： | HANE-16A connector |
| The operating system is ready function can be synchronized with the production line： | Switching signal |
| Temperature sensor： | Standard Ni120RTD ± 2 / Another optional Pt100 |
| Melt tank and motor protection： | Over-temperature and intermittent cold start protection |
| Production line automatic tracking function： | 0-10V |
| Detection detects motor rotation stop： | Switching signal |
| Thermostat fault detection： | Switching signal |
| Ready output： | 220V voltage output |