Name:P10 high precision control system glue melting machine
Introduce:P10 glue melting machine is suitable for high precision hot melt adhesive application. It adopts PLC controlled high precision control system, multi-functional temperature control module and solid-state relay.
Features
Intelligent control:
1. Automatic power on or power off selection
2. One key heat preservation
3. P.I.D. temperature customization
4. Synchronous linkage function of production line and equipment
5. Ready signal output
6. 7-day work timing control
7. Multi stage linear adjustment of motor and gear pump speed
8. Quick click interface
9. Custom heating sequence for each temperature zone
Attribute:
Melting cylinder: 10kg / 20lb
Throat: 4
Flux / hour: 16KG / HR
External dimension: l (885) x w (450) x H (1142)
Weight: 107Kg
Advantage:
The capacity of P10 hot melt glue machine is 10kg. It is equipped with a set of independent drive motor and a set of single or double-layer gear pump. For different glue melting speed and glue supply, the position of installing low level sensor is reserved in the melting cylinder, and the switch signal can also be output through the control system.
Host specification:
Number of motors: 1
Drive motor: 1 / 4 HP: 220vac-3phase
Maximum pump speed: 100 rpm
Gear pumpable ratio: 0.27 CC / revolution - 10.0cc/revolution (optional)
Gear pumpable output: single gear pump / double gear independent output (optional)
Maximum output: 4 sprayers / pipes
System glue pressure: maximum 1000PSI (68bar)
Control function:
Power supply voltage: 220VAC 1PH + N + e 50 / 60Hz
220VAC 3PH+N+E 50/60Hz
380VAC 3PH+N+E 50/60Hz
Maximum power of the system: 12KW
Temperature control mode: micro processing segmented p.i.d control
Electrical connection mode: hane-16a connector
System ready function can operate synchronously with production line: switch signal
Temperature sensor: Standard ni120rtd ± 2 / optional Pt100
Melting cylinder and motor protection: over temperature interruption and low temperature start protection
Automatic tracking function of production line: 0-10V
Motor detection rotation stop detection: switch signal
Temperature control fault detection: switch signal
Ready output: 220V voltage output